Curing Chambers

Curing Chambers

During the paste mixing process, lead oxide, water, acid, and other chemicals are blended in the mixer to form a thick paste. It is most important process in battery manufacturing and highly affects the quality and life of battery. The paste-mixing machine is fully automatic and PLC controlled.

Description

During the paste mixing process, lead oxide, water, acid, and other chemicals are blended in the mixer to form a thick paste. It is most important process in battery manufacturing and highly affects the quality and life of battery. The paste-mixing machine is fully automatic and PLC controlled.

CRC H220 – Curing Chamber

CRC H220 – Curing Chamber

CRC H220 – Curing Chamber

Features

  • Efficient Production and High Productivity
  • Suitable for all kinds of Con-cast, Expanded, Punched and Gravity Casted battery plates
  • Sytem Capacity up to 70.000 panels per batch
  • 20 Hours Batch Time
  • High Standards for Health, Safety and Environment

Curing chamber is designed to accelerate the curing process of lead acid battery plates. The chamber ensures drying and proper crystal growth in the freshly pasted plate grids. Humidity, temperature and time values in the chamber can be assigned separately for loading, curing and drying cycles automatically.

  • 20 Set Different Process Parameters
  • 12 Hours Curing Cycle + 8 Hours Drying Cycle for gravity casted plates
  • Atomized Water Humidifying
  • Vertical Sliding Door
  • Inside Wall Stainless Steel (SUS304)
  • Automatic Temperature/Humidity/Time Control System
  • Optimum air output and input system

Optional Features

  • Steam Generator
  • Plate racks design will be provided
  • Hot air inlet valve system

Capacity

  • Standard: 140.000 single plates/batch (for gravity casted plates)
  • Batch Time 20 Hours (for gravity casted plates)

Required Labor

  • 1 person for loading and unloading

Operational Range

For Curing Cycle:

  • Temperature 25 ~ 85°C
  • Humidity 20%~100%Rh

For Drying Cycle:

  • Temperature 25 ~ 85°C

Control Accuracy:

  • Temperature +- 2°C
  • Moisture  +- 2% Rh
  • SIEMENS PLC system
  • FESTO Pneumatic System

 

  • Installation Power : 24 kW
  • Electrical Power Consumption : 24 kW
  • Air Pressure : 5-7 bar
  • Air Consumption : 3,2 litres/minute
  • Natural Gas Pressure : 0-300mBar
  • Natural Gas Consumption : 10,3 m3/h
  • Burner Capacity : 300.000 kCal/hr
  • Color : RAL 5015 (ZESAR BLUE)